As enterprises widen their global reach and establish more branches in different regions, applications such as instant messaging and teleconferencing are becoming more common. This imposes high requirements for end-to-end (E2E) Datacom technologies. A network capable of providing point to multipoint (P2MP) and multipoint to multipoint (MP2MP) services is paramount to Datacom function implementation. To ensure the security of enterprise data, secure, reliable, and transparent data channels must be provided for multipoint transmission.
Generally, enterprises lease virtual switching instances (VSIs) on a carrier network to carry services between branches.
In Figure 1, Branch 1 and Branch 3 belong to one department (the Procurement department, for example), and Branch 2 and Branch 4 belong to another department (the R&D department, for example). Services must be isolated between these departments, but each department can plan their VLANs independently (for example, different service development teams belong to different VLANs). The enterprise plans to dynamically adjust the departments but does not want to lease multiple VSIs on the carrier network because of the associated costs.
In the traditional service model supported by the NetEngine 8000 F shown in Figure 1, common sub-interfaces (VLAN type), sub-interfaces for dot1q VLAN tag termination, or sub-interfaces for QinQ VLAN tag termination are created on the user-side interfaces of the PEs. These sub-interfaces are bound to different VSIs on the carrier network to isolate services in different departments. If the enterprise sets up another department, the enterprise must lease another VSI from the carrier to isolate the departments, increasing costs.
To allow the enterprise to dynamically adjust its departments and reduce costs, the EVC model can be deployed on the PEs. In the EVC model, multiple BDs are connected to the same VSI, and the BDs are isolated from each other.
EVC Layer 2 sub-interfaces are created on the PEs on the user side, are configured with QinQ traffic encapsulation type and pop double traffic behavior, and transmit Enterprise services to the carrier network.
The NetEngine 8000 F also supports the exclusive VSI service mode. This mode is similar to a traditional service mode in which sub-interfaces are bound to different VSIs to connect to the VPLS network. Figure 3 shows a diagram of the exclusive VSI service mode.
In the exclusive VSI service mode, each VSI is connected to only one BD, and the BD occupies the VSI resource exclusively.