Setting the Alarm Severity

You can change the default alarm severity.


  1. Run system-view

    The system view is displayed.

  2. Run alarm

    The alarm management view is displayed.

  3. Run alarm-name alarm-name severity { critical | major | minor | warning }

    The alarm severity is set.

    If you are concerned about certain types of alarms, you can set the highest severity for these types of alarms and configure filtering conditions. In this manner, the system reports only these types of alarms to the NMS.

  4. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >